University of Oulu
Oulu University Library
Jurita
Laturi
Muuntaja

Similar Items

Cover Image

Chen, MY, Vahera, T, Hsi, CS, et al. Tape casting system for ULTCCs to fabricate multilayer and multimaterial 3D electronic packages with embedded electrodes. J Am Ceram Soc. 2017; 100: 1257– 1260. doi:10.1111/jace.14639.

Tape casting system for ULTCCs to fabricate multilayer and multimaterial 3D electronic packages with embedded electrodes

Saved in:
Author: Chen, Mei‐Yu1; Vahera, Timo1; Hsi, Chi‐Shiung2;
Organizations: 1Microelectronics Research Unit, Faculty of Information Technology and Electrical Engineering, University of Oulu, Oulu, Finland
2Department of Material Science and Engineering, National United University, Miao‐Li, Taiwan
Format: article
Version: accepted version
Access: open
Online Access: PDF Full Text (PDF, 0.6 MB)
Persistent link: http://urn.fi/urn:nbn:fi-fe201903209378
Language: English
Published: John Wiley & Sons, 2017
Publish Date: 2018-01-10
Description:

Abstract

A 3D multilayer structure built by two ultra‐low temperature co‐fired ceramic (ULTCC) compositions with silver embedded electrodes are co‐fired at a temperature of 450°C. The 3D multilayer module is prepared by laminating the ULTCC green tapes with a new binder system, which organics can be completely burned out at temperature of 250°C before the sintering of the ULTCC 3D modulus. High‐density microstructures are achieved for the sintered module. In this study, the ULTCC feasible binder system is introduced. Also, ULTCC multilayers and multimaterial structures with surface and embedded silver electrodes are fabricated. This research opens up a new horizon for fabrication of electroceramic devices with embedded electrodes in multimaterial devices.

see all
Series: Journal of the American ceramic society
ISSN: 0002-7820
ISSN-E: 1551-2916
ISSN-L: 0002-7820
Volume: 100
Issue: 4
Pages: 1257 - 1260
DOI: 10.1111/jace.14639
OADOI: https://oadoi.org/10.1111/jace.14639
Type of Publication: A1 Journal article – refereed
Field of Science: 216 Materials engineering
213 Electronic, automation and communications engineering, electronics
Subjects:
glass-ceramics
multilayers
tape casting
ultra-low sintering temperature ceramics
Article
Funding: The work leading to these results has received funding from the European Research Council (ERC) under the European Union's Seventh Framework Programme (FP7/2007‐2013)/ ERC Grant agreement (No. 291132) and ERC‐2014‐PoC (No. 640887).
Copyright information: This is the peer reviewed version of the following article: Chen, MY, Vahera, T, Hsi, CS, et al. Tape casting system for ULTCCs to fabricate multilayer and multimaterial 3D electronic packages with embedded electrodes. J Am Ceram Soc. 2017; 100: 1257– 1260. doi:10.1111/jace.14639, which has been published in final form at https://doi.org/10.1111/jace.14639. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving.