Walaa Abd-Elaziem, Mohsen A. Hassan, Takehiko Makino & Atef Hamada (2021) Grain size affecting the deformation characteristics via micro-injection upsetting, Materials Science and Technology, 37:10, 918-929, DOI: 10.1080/02670836.2021.1964058
Grain size affecting the deformation characteristics via micro-injection upsetting
|Author:||Abd-Elaziem, Walaa1; Hassan, Mohsen A.2; Makino, Takehiko3;|
1Department of Mechanical Design and Production Engineering, Faculty of Engineering, Zagazig University, Zagazig, Egypt
2Egypt-Japan University of Science and Technology, New Borg El-Arab City, Egypt
3Department of Mechanical Engineering, Nagoya Institute of Technology, Nagoya, Japan
4Kerttu Saalasti Institute, University of Oulu, Nivala, Finland
|Online Access:||PDF Full Text (PDF, 2 MB)|
|Persistent link:|| http://urn.fi/urn:nbn:fi-fe2023041837300
|Publish Date:|| 2023-04-18
The micro-injection upsetting (MIU) experiments of commercially pure aluminium have been conducted on two groups of specimens with different grain structures. One group is of coarse grain (CG, undeformed) and the other group is of fine grain (FG) achieved via the 4th pass equal channel angular pressing in micro-meso/scale. The two groups were further processed by micro/meso-scale extrusion before conducting MIU for fabricating tiny pins. Micro-upsetting test of the tiny pins showed that the material has a good isotropic flow forming and is free of undesirable defects comparing with the CG counterparts, which can be ascribed to the decreasing of grain boundary strengthening effect in the case of FG structure.
Materials science and technology
|Pages:||918 - 929|
|Type of Publication:||
A1 Journal article – refereed
|Field of Science:||
216 Materials engineering
The authors would like to acknowledge the financial support from the Missions Sector-Higher Education Ministry, Egypt, through this work.
© The Author(s) 2021. This is an Accepted Manuscript version of the following article, accepted for publication in Materials Science and Technology. Walaa Abd-Elaziem, Mohsen A. Hassan, Takehiko Makino & Atef Hamada (2021) Grain size affecting the deformation characteristics via micro-injection upsetting, Materials Science and Technology, 37:10, 918-929, DOI: 10.1080/02670836.2021.1964058. It is deposited under the terms of the Creative Commons Attribution-NonCommercial License (http://creativecommons.org/licenses/by-nc/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is properly cited.