A double layer FSS filter for sub-THz applications
Ghavidel, A.; Kokkonen, M.; Myllymäki, S. (2021-10-05)
Ghavidel, A., Kokkonen, M. & Myllymäki, S. A double layer FSS filter for sub-THz applications. Sci Rep 11, 19773 (2021). https://doi.org/10.1038/s41598-021-99256-2
© The Author(s) 2021. This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
https://creativecommons.org/licenses/by/4.0/
https://urn.fi/URN:NBN:fi-fe2021100850408
Tiivistelmä
Abstract
This work presents the simulated and measured performance of single- and double-layer frequency selective surface filters for operation at sub-THz frequencies (250 GHz center frequency). They were composed of concentric square loops with a split as a unit cell resonator on top of a low dielectric permittivity, low thickness material (RT5880). Both a single layer filter and a cascaded two layer filter with varied distances were investigated. The simulated bandwidth for the cascaded filter was 27 GHz and 16 GHz and 9 GHz bandwidth measured with a THz-TDS and microwave system.
Kokoelmat
- Avoin saatavuus [31978]